OPTIONAL COMPONENTS
5.Put the battery fixture over the battery and fix the battery box and battery fixture by four screws. (Fig. 4)
6.Each harness is connected to the battery connectors (Fig. 5) and switches to a fixed mounting plate on the battery clip.(Fig. 4)
6.Connect the harness to the battery connector and battery switch (Fig. 6) and bind the harnesses by the clip on the battery fixture.
7.Cover the opening beside the battery switch with the top cover removed in procedure 2 (four screws). The harness in no use is bound by the clip on the back of the top cover.
8.Put the battery box cover over the battery box and fix the battery box cover with screws (three screws on the right and left). (Fig. 6)
9.Perform the setting for battery through the keys on the control panel of refrigerator. Refer to the procedure on the next page “Setting for battery before starting”
10.Switch on the battery switch on the battery box.
Battery fixture | Clip |
| |
Screw | Screw |
| |
| Fig. 4 |
It is fixed behind the
electrical | box cover |
with a clip. | To the battery |
To the battery
Fig. 5
Electrical box cover(rear side)
Battery box cover
Fig. 6
- 74 -
36
