Manuals / Muratec / Computer Equipment / All in One Printer

Muratec F-112 Guidelines for Using Paper, Paper Specifications, Category Specifications

Models: F-112

1 95

Download 95 pages 60 Kb

Page 90

Guidelines for Using Paper

For the best result, use conventional 75 g/m2 (20 lb) paper. Ensure that the paper is of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges.

If you are unsure of what type of paper you are loading, such as bond or recycled paper, check the label on the package.

The following problems may cause print quality deviations, jamming or even damage to the machine:

Symptom	Problem with Paper	Solution

Poor print quality or toner	Too moist, too rough, too	Try another kind of paper,
adhesion, problems with	smooth or embossed; faulty	between 100 ~ 400 Sheffied, 4
feeding	paper lot	~ 5 % moisture content.

Dropout, jamming, curl	Stored improperly	Store paper flat in its moisture-
		proof wrapping.

Increased gray background	Too heavy	Use lighter paper, use the rear
shading/machine wear		output slot.

Excessive curl problems	Too moist, wrong grain	Use the rear output slot.
with feeding	direction or short-grain	Use long-grain paper.
	construction

Jamming, damage to	Cutouts or perforations	Do not use paper with cutouts or
machine		perforations.

Problems with feeding	Ragged edges	Use good quality paper.

NOTES:

•Do not use letterhead paper printed with low-temperature inks, such as those used in some types of thermography.

•Do not use raised or embossed letterhead.

•The machine uses heat and pressure to fuse toner to the paper. Insure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (200 °C or 392 °F for 0.1 second).

Paper Specifications

Category	Specifications

Acid Content	5.5 pH or lower

Caliper	0.094 ~ 0.18 mm (3.0 ~ 7.0 mils)

Curl in Ream	Flat within 5 mm (0.02 in.)

Cut Edge Conditions	Cut with sharp blades with no visible fray.

Fusing Compatibility	Must not scorch, melt, offset or release hazardous
	emissions when heated to 200 °C (392 °F) for 0.1
	second.

Grain	Long Grain

Moisture Content	4 % ~ 6 % by weight

Smoothness	100 ~ 400 Sheffied

A.6 SPECIFICATIONS

Image 90

Muratec F-112 user manual Guidelines for Using Paper, Paper Specifications, Category Specifications

Contents

Page Page Contents Setting the Paper Type and Size for the Manual Feeder Receiving a FaxChanging Setting Options Advanced Fax Setting Options Paper Feeding Problems Copying ProblemsInput Misfeed Exit Misfeed Important Precautions and Safety Information Laser Safety Statement Recycling Ozone SafetyPower Saver Radio Frequency EmissionsRinger Equivalence Number Canadian Radio Interference RegulationsFax Branding ViiiYou should also know that Limited warranty Page Getting Started Unpacking TAM Lead for UK onlySelecting a Location Clearance SpaceRear View Understanding the Component LocationFront View These are the main components of your machineControl Panel Functions O P Y Starts a jobAttaching Accessories Document Output SupportHandset and Handset Cradle Installing the Toner Cartridge Loading Paper You can load approximately 250 sheetsChanging the Paper Size in the Paper Tray Connecting the Telephone Line Wall jackTurning the Machine On To view your display text in another language, see the nextSetting the Machine ID Changing the Display LanguageEntering Characters Using the Number Keypad Changing Numbers or Names Setting the Date and TimeKeypad Letters and Numbers Inserting a PauseSetting the Paper Type and Size Changing the Clock ModeSpeaker Volume Setting SoundsSpeaker, Ringer, Key Sound and Alarm Sound You can control the following soundsUsing the Save Modes Toner Save ModeToll Save Mode Setting Up the Fax System Power Save ModeAvailable Fax Setup Options Option DescriptionBasic Functions Preparing a Document Loading a DocumentAdjusting the Document Resolution Mode Recommended forSending a Fax Automatically Sending a Fax ManuallyAutomatic Redialing Redialing the Last NumberConfirming Transmission To redial the number you last calledAbout Receiving Modes Loading Paper for Receiving FaxesReceiving Automatically in Fax Mode Receiving Manually in Tel ModeReceiving Automatically in Ans/Fax Mode Receiving Manually Using an Extension Telephone Receiving Faxes Using the Drpd ModeReceiving Faxes in the Memory Adjust the guide to the width of the print material Loading Paper for CopyingAfter copying, close the rear cover Line. Press Enter to access the menu itemOpen the rear cover to use the rear output slot Use the scroll buttonSetting Copy Options Making a CopyPress Reduce/Enlarge or the scroll button or until Custom50-150% displays on the bottom line. Press EnterOn the display Changing the Default Settings Setting the Time Out OptionCollation Copying Press Start Copy/Fax to begin copyingPage Speed Dialing Storing a Number for Speed DialingSetting a Group Dial Number Group DialingLine and press Enter Editing Group Dial Numbers Searching Sequentially through the Memory Searching for a Number in the MemoryPrinting a Phonebook List Searching with a Particular First LetterAdvanced FAX Functions Sending a Delayed Fax Sending Broadcasting FaxesAdvanced FAX Sending a Priority Fax Polling a Remote MachineAdvanced FAX To cancel your selection, press 2 to select No Or until you see the fax job you want toAdditional Features Using Secure Receiving Mode Bottom line and press Enter Press the scroll buttonPrinting Reports Advanced Fax Setting Options Using Advanced Fax SettingsChanging Setting Options Printing a ReportRCV Forward Memo Maintenance Clearing the Memory Cleaning the Outside Adjusting ShadingCleaning Your Machine Cleaning the InsideCleaning the Scan Unit Disassemble the white roller as follows Saving Toner Maintaining the Toner CartridgeToner Cartridge Storage Expected Cartridge LifeSetting the Notify Toner Option Cleaning the DrumReplacing the Toner Cartridge Consumables and Replacement Parts Ignoring the Toner Empty MessageItems Yield Average Replacing the ADF Rubber Pad Memo Troubleshooting Clearing Document Jams Input MisfeedExit Misfeed Clearing Paper Jams Paper TrayMessage Location of Jam Go to Paper Exit Area Fuser Area or Around the Toner CartridgeManual Feeder Tips for Avoiding Paper JamsClearing LCD Error Messages Display Meaning Suggested solutionsNo number assigned to it For storing a number, see One-touch or speed dial Dial the number manually usingLocation you tried to use has Paper tray has run out Load paper in the paper tray. SeeSolving Problems Paper Feeding ProblemsCondition Suggested solutions Copying Problems Faxing Problems Specifications General Specifications Characters x 2 linesCopier Specifications Facsimile Specifications Overview Paper SpecificationsSize mm/in Weight Capacity Supported Sizes of PaperGuidelines for Using Paper Paper SpecificationsCategory Specifications Paper Storage Environment Memo Index Page Visit us at