Redialing the Last Number
To redial the number you last called:
Press Redial/Pause.
If a document is loaded in the ADF, the machine automatically begins to send.
2
Confirming Transmission
When the last page of your document has been sent successfully, the machine beeps and returns to Standby Mode.
When something goes wrong while sending your fax, an error message appears on the display. For a listing of error messages and their meanings, see page 6.6.
If you receive an error message, press Stop/Clear to clear the message and try to send the document again.
You can set your machine to print a confirmation report automatically each time sending a fax is completed. For further details, see the MSG Confirm item on page 1.20.
Automatic Redialing
When the number you have dialed is busy or there is no answer when you send a fax, the machine automatically redials the number every three minutes up to seven times by the factory default settings.
When the display shows “Retry Redial ?,” press Enter to redial the number without waiting. To cancel the automatic redialing, press Stop/Clear.
To change the time interval between redials and the number of redial attempts. See page 1.20.
BASIC FUNCTIONS 2.5
