Muratec F-112 Setting the Date and Time, Keypad Letters and Numbers, Changing Numbers or Names

Keypad Letters and Numbers

Key			Assigned numbers, letters or characters			1
1	1	Space
2	A	B	C	2
3	D	E	F	3
4	G	H	I	4
5	J	K	L	5
6	M	N	O	6
7	P	Q	R	S	7
8	T	U	V	8
9	W	X	Y	Z	9
0	+	-	, .		’ / * # & 0

Changing Numbers or Names

If you make a mistake while entering a number or name, press the button to delete the last digit or character. Then enter the correct numbers or characters.

Inserting a Pause

With some telephone systems, you must dial an access code (9, for example) and listen for a second dial tone. In such cases, you must insert a pause in the telephone number. You can insert a pause while you are setting up one-touch or speed dial numbers.

To insert a pause, press Redial/Pause at the appropriate place while entering the telephone number. A “–” appears on the display at the corresponding location.

Setting the Date and Time

The current date and time are shown on the display when your machine is on and ready to work. All of your faxes will have the date and time printed on them.

NOTE: If power to the machine is cut off, you need to reset the correct time and date once the power is restored.

1Press Menu until “Machine Setup” appears on the top line of the display.

2 Press the scroll button ( or ) to display “Date & Time” on the bottom line and press Enter.

3Enter the correct time and date using the number keypad.

Month	= 01 ~ 12
Day	= 01	~ 31
Year	= requires all four digits
Hour	= 01 ~ 12 (12-hour mode)
	00	~ 23 (24-hour mode)
Minute	= 00	~ 59

GETTING STARTED 1.15