Muratec F-112 Loading Paper for Copying, Adjust the guide to the width of the print material

Models: F-112

1 95
Download 95 pages 60 Kb
Page 42
Image 42

Making a Copy

Loading Paper for Copying

The instructions for loading print materials into the paper tray are the same whether you are faxing or copying. For further details, see page 1.9 for loading in the paper tray.

For copying, you can also use the manual feeder to load special print material, such as transparencies or labels, if they are Letter-, A4-, Legal- sized. For further details about print materials you can use, see page A.5.

To load paper in the manual feeder:

1Load a sheet of the print material with the print side face up and into the center of the tray.

For transparencies, hold them by the edges and avoid touching the print side. Oils from your finders can cause print quality problems.

2Adjust the guide to the width of the print material.

NOTE: When printing on previously printed paper from the manual feeder, the printed side should be facing down with an uncurled edge to the machine. If you experience problems with paper feed, turn the paper around.

2.10BASIC FUNCTIONS

Page 42
Image 42
Muratec F-112 user manual Loading Paper for Copying, Adjust the guide to the width of the print material