Muratec F-112 user manual Paper Specifications, Overview, Supported Sizes of Paper

Paper Specifications

Overview

Your machine accepts a variety of print materials, such as cut-sheet paper, including up to 100% recycled fiber content paper, envelopes, labels, transparencies and custom-size paper. Properties, such as weight, composition, grain and moisture content, are important factors affecting the machine’s performance and the output quality. Paper that does not meet the guidelines outlined in this user’s guide can cause the following problems:

•Poor print quality

•Increased paper jams

•Premature wear on the machine.

NOTES:

•Some paper may meet all of the guidelines in this guide and still not produce satisfactory results. This may be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which Muratec has no control.

•Before purchasing large quantities of paper, insure the paper meets the requirements specified in this user’s guide.

CAUTION: Using paper that does not meet these specifications may cause problems, requiring repairs. These repairs are not covered by the Muratec warranty or service agreements.

Supported Sizes of Paper

Size (mm/in.)	Weight			Capacity*
Plain paper	• 60 to 90 g/m2 bond (16
Letter (215.9 x 279/8.5 x 11)				• 250 sheets of 75 g/m2
A4 (210 x 297/8.27 x 11.69)	to 24 lb) for the paper
				bond (20 lb) paper for
Folio (215.9 x 330.2/8.5 x 13)	tray
				the paper tray
Legal (215.9 x 355.6/8.5 x 14)	• 60 to 163 g/m	2	bond (16
				• 1 sheet of paper for the
Executive (184.2 x 266.7/7.25 x 10.5)
	to 43 lb) for the manual
				manual feeder
B5(182 x 257/7.2 x 10)
	feeder
Labels
Letter (215.9 x 279/8.5 x 11)	120 to 150 g/m2
A4 (210 x 297/8.27 x 11.69)				1 sheet of paper for the
				manual feeder
Transparencies
Letter (215.9 x 279/8.5 x 11)	138 to 146 g/m2
A4 (210 x 297/8.27 x 11.69)

* Capacity may vary depending on print materials’ weight and thickness, and environmental conditions.

NOTE: You may experience jams when using print materials with a length of less than 127 mm (5 in.). For optimum performance, ensure that you are storing and handling the paper correctly. Please refer to “Paper Storage Environment” on page A.7.

A

SPECIFICATIONS A.5