OPTIONAL COMPONENTS
6.An attached binder (two pcs) is used for the fan cover of the top of the chamber as the Fig. 5, and a temperature sensor is fixed.
7.Route the capillary on the top of the chamber and fix it with the provided clip and screw. (Fig. 6)
8.Make a cut on the rubber caps so that the capillary can pass the caps and place them back on the access port (inside and outside). (Fig. 7)
Binder | Fig. 5 |
| Clip |
| Capillary |
| Fig. 6 |
| Capillary |
Rubber cap
Fig. 7
Attachment of recorder MTR-G04
1.Unscrew the screw fixing the panel cover at the space for temperature recorder and open the panel cover. (Fig. 1)
2.Fix the temperature recorder to the frame in the temperature recorder mounting kit
Shaft
Panel cover
Fig.
Temperature
recorderRecorder fitting
Fig. 2
33
- 71 -