Computer Input
Input Source Selection (Computer 2: RGB)
Direct Operation
Choose Computer 2 (RGB) by press the COMPUTER 2 button on the remote control or press the INPUT button on the top control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Remote Control
HDMI
COMPUTER 2 button
Computer 2 (RGB)*
Top Control
INPUT button
Computer 1
Computer 2 *
HDMI
Video
*COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output.
|
|
|
|
| |
|
|
|
| ||
|
|
|
| ||
| Menu Operation | Input Menu | |||
|
|
|
|
| |
1 | Press the MENU button to display the |
| |||
Menu. Press the Point ▲▼ buttons, move the highlight |
| ||||
| to Input and then press the Point ► or the SELECT |
| |||
| button. |
| |||
2 | Use the Point ▲▼ buttons to select Computer 2 and |
| |||
then press the SELECT button. |
| ||||
3 | When Computer 2 is selected, analog RGB input |
| |||
| source will be selected directly. |
| |||
Note:
When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.45).
28
