Computer Input
Input Source Selection (Computer 1: RGB)
Direct Operation
Choose Computer 1(RGB) by pressing the COMPUTER 1 button on the remote control or press the INPUT button on the top control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Remote Control
HDMI
COMPUTER 1 button
Top Control
INPUT button
Computer 1
Computer 2 *
HDMI
Video
Computer 1(RGB)
Computer 1(Scart)
Input Menu
*COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output.
| Menu Operation |
1 | Press the MENU button to display the |
Menu. Use the Point ▲▼ buttons to select Input and | |
| then press the Point ► or the SELECT button. |
2 | Use the Point ▲▼ buttons to select Computer 1. |
3 | When Computer 1 is selected, press the Point ► to |
access the submenu items. Use the Point ▲▼ buttons |
to select the RGB input source and then press the SELECT button.
Note:
When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.45).
Computer
1
27
