Sanyo PLC-WL2500 owner manual Basic Operation Menu Bar

Basic Operation

Menu Bar

For detailed functions of each menu, see “Menu Tree” on pages 68-69.

Main Menu Sub-Menu

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

①Input

Used to select an input source from Computer 1, Computer 2, HDMI, Video or S-video. (pp.27-28,37-38)

②PC adjust

Select Auto PC adj.., Fine sync, Total dots, Horizontal, Vertical, Current mode, Clamp, Display area H and Display area V to adjust the parameters to match with the PC input signal format. (pp.34-35)

③Image select

For computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green),

Colorboard and Image 1-4. (p.33)

For video or HDMI source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green),

Colorboard and Image 1-4. (p.40)

④Image adjust

For computer source, used to adjust computer image [Contrast, Brightness, Color temp.., White balance (Red/Green/ Blue), Sharpness and Gamma]. (pp.34-35)

For video or HDMI source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp.., White balance (Red/Green/Blue), Sharpness, Gamma, Noise reduction and Progressive]. (pp.41-42)

⑤Screen

For computer source, used to adjust size of the image [Normal, True, Full, Custom and Digital zoom +/– ]. (pp.35-36) For video or HDMI source, used to set size of image [Normal, Full, Zoom, Wide, Natural wide and Custom]. (p.43)

⑥Sound

Used to adjust the volume or mute the sound. (p.24)

⑦Setting

Used to set the projector’s operating configurations. (pp.44-58)

⑧Information

Display the input source information: Input , H-sync freq.., V-sync freq.., Screen, Language, Lamp status, Lamp counter, Power management, Key lock, PIN code lock and Remote control.. (p.59)

⑨Network

See owner’s manual of “Network Set-up and Operation”.

⑩Guide

The key operation is displayed.

22