Sanyo PLC-WL2500 owner manual Video Input, Input Source Selection Video, S-video, Video Note

Video Input

Input Source Selection (Video, S-video)

Direct Operation

Choose Video or S-videoby pressing the VIDEO button or the S-VIDEO button on the remote control or press the INPUT button on the top control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Remote Control

VIDEO button

Video

S-VIDEO button S-video

Top Control

INPUT button

Computer 1

Computer 2 *

HDMI

Video

S-video

*COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output.

Menu Operation

Input Menu

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
2	then press the Point ► or the SELECT button.
	Use the Point	▲▼	buttons to select either Video or

S-videoand then press the SELECT button.

Video

S-video

Note:

When video input signal is connected to the VIDEO jack, select Video.

When video input signal is connected to the S- VIDEO jack, select S-video.

When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.45).

37