Basic Operation

NO SHOW button

Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button.

“No show” disappears after 4 seconds.

IMAGE ADJ.. button

Press the IMAGE ADJ. button on the remote control to adjust a image level of the screen.

For more detail, see pp.44-46.

IMAGE SEL.. button

Press the IMAGE SEL. button on the remote control to select a desired image level of the screen.

For more detail, see pp.37, 41.

Remote Control

NO SHOW button

IMAGE ADJ.. button

KEYSTONE button

P-TIMER

IMAGE SEL..

button

button

 

✔Note:

•See the previous page for the description of other buttons.

P-TIMER button

Press the P-TIMER button on the remote control. The

 

Timer display “00 : 00” appears on the screen and starts

 

to count time (00 : 00–59 : 59).

 

To stop the P-TIMER, press the P-TIMER button.

P-Timer display

To cancel the P-TIMER, press the P-TIMER button again.

KEYSTONE button

Press the KEYSTONE button on the remote control. The “Keystone” appears on the screen.

Use the Point ed7 8 buttons to correct keystone distortion. The keystone adjustment can be stored (pp.39, 43).

•The white arrows indicate that there is no correction.

•A red arrow indicates the direction of correction.

•An arrow disappears at the maximum correction.

•If you press the KEYSTONE button on the remote control again while the Keystone dialog box is being displayed, the keystone adjustment will be canceled.

•“Keystone” disappears after 10 seconds.

Reduce the upper width with

Reduce the lower width

Reduce the left part with

Point e button.

with Point d button.

Point 7 button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reduce the right part with Point 8 button.

29