Input Selection
Computer Input Source SelectionMenu OperationWhen Selecting the INPUT 1 with DVI/D-sub 15 Board

1

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer

 

to the INPUT Menu icon.

2

Use the Point ed buttons to move the red arrow pointer

to the desired input and then press the SELECT button.

 

The Source Select Menu appears.

3

Use the Point ed buttons to select the desired source

and then press the SELECT button.

RGB (PC analog)

When your computer is connected to the INPUT 1 (ANALOG) terminal, select RGB (PC analog).

RGB (PC digital)

When your computer is connected to INPUT 1 (DIGITAL) terminal, select RGB (PC digital).

INPUT MENU

Input Menu icon

Move the pointer (red arrow) to Input 1 and press the SELECT button.

Input 1

Source Select Menu

Move the pointer (red arrow) to the desired source and press the SELECT button.

✔Note:

• HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content which is delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

When Selecting the INPUT 2 with 5-BNC/Video Board

INPUT MENU

When connecting the computer output [5 BNC Type (Green, Blue, Red, Horiz. Sync, and Vert. Sync.)] from the computer to G, B, R, H/HV, and V jacks:

RGB

 

When your computer is connected to the INPUT 2 (5 BNC

Input 2

INPUT JACKS) terminal, select RGB.

INPUT Menu icon

Move the pointer (red arrow) to Input 2 and press the SELECT button.

Source Select Menu

Move the pointer (red arrow) to RGB and press the SELECT button.

31