Setting

Lamp counter

This function is used to reset the lamp counter.

When the lamp life reaches a recommended lamp replacement

time, the time shown in the dialog box turns red and the Lamp replacement icon appears on the screen, indicating that the end of lamp life is approaching.

When replacing the projection lamp, reset the lamp counter. See “Resetting the Lamp Counter” on page 58.

✔Note:

•The Lamp replacement icon will not appear when the Display function is set to “Off” (p.47), during “Freeze” (p.28), or “No show” (p.29).

Filter counter

This function is used to set a frequency for the filter cleaning.

When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select RESET and set the timer. The Filter warning icon will not turn off until the filter counter is reset.

For details about resetting the timer, refer to “Resetting the Filter Counter” on page 55.

Test pattern

Various test pattern are available for use when setting up the projector.

Factory default

This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, filter counter and filter timer to the factory default settings.

Quit

Exit the Setting Menu.

This icon appears on the screen when the end of lamp life is approaching.

✔Note:

•This icon also appears at turning on and selecting input source.

Filter counter

Set the red frame pointer to the item and press the SELECT button.

Use the Point 7 8 buttons to set the timer. Select from (Off/ 100H/300H/500H) depending on the use environment

Fig..1 Filter warning icon

Filter warning icon appears on the screen at a set time.

✔Note:

•Fig.1 appear at turning on and selecting input source.

•Fig.1 will not appear when the Display function is set to “Off” (p.47), during “Freeze” (p.28), or “No show” (p.29).

Factory default

Set the red frame pointer to the item and press the SELECT button.

Select Factory default and this box appears. Select [Yes], and the next box appears.

Select [Yes] to activate it.

54