Appendix
The projector is detecting abnormal condition..
| Indicators |
| Projector Condition | |
LAMP | READY | WARNING | LAMP | |
|
|
| ||
red | green | TEMP. | REPLACE |
|
red | orange |
| ||
|
|
| ||
|
|
|
| The temperature inside the projector is elevated close to the |
| ✽ |
| ✽ abnormally high level. | |
The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and
✽ the temperature returns to normal, the READY indicator lights green and the projector can be turned on. (The WARNING TEMP. indicator keeps blinking.) Check and clean the filter.
|
| The projector has been cooled down enough and the temperature |
| ✽ | returns to normal. When turning on the projector, the WARNING TEMP. |
| indicator stops blinking. Check and clean the filter. | |
|
| |
|
|
|
✽ |
| Any of 4 lamps becomes out, Lamp Mode is changed over from 4 lamps to 2 |
| lamps. And when any of 2 lamps are out, a projector operates with 1 lamp. |
The lamp has been used overtime. Replace the lamp immediately
✽ ✽ ✽ and then reset the lamp counter. The indicator will be turned off after resetting the counter.
The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center. Do not leave the projector on. It may cause an electric shock or a fire hazard.
69