Appendix

Indicators and Projector Condition

Check the indicators for the projector condition.

The projector is operating normally..

 

Indicators

 

Projector Condition

LAMP

READY

WARNING

LAMP

TEMP.

REPLACE

red

green

 

red

orange

 

 

 

 

 

 

 

 

The projector is off. (The main switch is OFF position or the AC power

 

 

 

 

cord is unplugged.)

 

 

 

 

 

 

 

 

✽

The projector is in stand-by mode. Press the ON/STAND-BY button to

 

 

 

turn on the projector.

 

 

 

 

 

 

 

 

 

 

 

 

✽

The projector is operating normally.

 

 

 

 

 

 

 

 

 

 

 

 

✽

The projector is preparing for stand-by or the projection lamp is

 

 

 

being cooled down. The projector cannot be turned on until cooling is

 

 

 

 

completed and the READY indicator lights green.

 

 

 

 

 

 

 

 

✽

The projector is in the Power management mode.

 

 

 

 

 

• • • on

• • • blinking at the normal rate

 

(approx. 1 second ON,

• • • dim

1 second OFF)

• • •blinking fast

 

• • • off

(approx. 0.5 seconds ON,

0.5 seconds OFF)

• • • blinking slow (approx. 2 seconds ON, 2 seconds OFF)

✽When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange. When this lights orange, replace the projection lamp a new one promptly. Reset the lamp counter after replacing the lamp (p.57)

68