Part Names and Functions
Input / Output Terminals and Jacks

q

w

t

y

 

 

SERIAL PORT IN

DIGITAL (DVI-D)

ANALOG

 

 

SERIAL PORT OUT

G

B

R

H/HV

V

S-VIDEO

 

 

 

 

 

 

 

 

 

▼

 

 

VIDEO/Y

Pb/Cb

Pr/Cr

 

 

 

R/C JACK

USB

 

 

 

 

 

 

L

RESET

e r ✽

u

i

INPUT 4 INPUT 3 INPUT 2 INPUT 1

qSERIAL PORT IN TERMINAL

If you control a projector by computer, you must connect a cable (not supplied) from your computer to this terminal.

wSERIAL PORT OUT TERMINAL

This terminal outputs signal from SERIAL PORT IN. More than two projectors can be controlled with one computer by connecting SERIAL PORT IN. of another projector to this terminal.

eR/C JACK

When using the wired remote control, connect the wired remote control to this jack with a remote control cable (not supplied).

rUSB CONNECTOR (Series B)

Use this connector when controlling a computer with the remote control of the projector. Connect the USB terminal of your computer to this connector with the USB cable (not supplied).

[RESET button

A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively.

tDVI INPUT TERMINAL

Connect computer output (Digital/DVI-D type) to this terminal. (Refer to p.20)

HD (HDCP Compatible) signal can be also connected. (Refer to p.21)

yD-sub 15-PIN INPUT TERMINAL

Connect computer output (Analog D-sub 15-pin type) to this terminal.

(Refer to p.20)

u5 BNC INPUT JACKS

Connect the component or composite video output signal from video equipment to VIDEO/Y, Pb/Cb, and Pr/Cr jacks or connect the computer output signal (5 BNC Type [Green, Blue, Red, Horiz. Sync, and Vert. Sync.]) to G, B, R, H/V, and V jacks (pp.20–21).

iS-VIDEO INPUT JACK

Connect the S-VIDEO output signal from video equipment to this jack (p.21).

11