Computer Input

Computer System SelectionAutomatic Multi-Scan System

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, or UXGA (refer to “Compatible Computer Specifications” on pages 70–71). If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Some computers need to be set manually.)

One of the following messages may appear when:

Auto

The projector cannot recognize the connected

signal conforming to the provided PC Systems.

 

 

The “Auto” is displayed on the PC System Menu

 

icon and the Auto PC Adjustment function works to

 

display proper images. If the image is not projected

 

properly, a manual adjustment is required. (pp.

 

36–37.)

-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 64.)

Mode 1

The preset system is manually adjusted in the PC

Adjust Menu. The adjusted data can be stored in

 

 

the Mode 1–10. (pp. 36-37)

 

PC systems provided in this projector is chosen.

SVGA 1

The projector chooses a proper system provided in

 

 

the projector and displays it.

✽Mode 1 and SVGA 1 are examples.

PC SYSTEM MENU

PC System Menu icon

Selected system is displayed.

PC SYSTEM MENU

Selecting Computer System Manually

PC system can also be selected manually.

1

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer

 

to the PC System Menu icon.

2

Use the Point ed buttons to move the red arrow pointer

to the desired system, and then press SELECT button.

PC System Menu icon Selected system is displayed

Systems in this dialog box can be selected.

Custom Mode (1–10) set in PC Adjust Menu. (pp.35–36)

33