Camera Settings (CAMERA)

bUsing the black and white mode only

(B/W)

Regardless of the luminance level, only use the black and white mode to view the image.

1Use the joystick lever (xy) to select [DAY/NIGHT], use the lever (vw) to select “B/W y”, and press the [ENTER] button.

The D/N SETTING-B/W screen appears.

D/N SETTING-B/W

BURST

OFF

FOCUS

1

PRESET

OFF

MENU

BACK

2Use the joystick lever (xy) to select [BURST] and use the lever (vw) to select “ON/OFF”.

Sets whether the color burst signal is turned on or off. In general, set this option to “OFF”.

Available settings:

•ON: The color burst signal is turned on.

•OFF: The color burst signal is turned off.

3Use the joystick lever (xy) to select [FOCUS] and use the lever (vw) to select focus compensation mode.

In general, set this option to “1”. If images are out of focus, set this option to “2”.

Available settings:

•1: Near-infrared wavelength correction (around 900nm) is set during the black and white mode.

•2: Visible light spectrum is set during the color mode.

☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.

21