Sanyo VCC-MC700P Specifications

Specifications

Image sensor	: 1/4"
Effective pixels	: 752 (H) x 582 (V)
Horizontal resolution	: Over 520 TV lines
Lens	: x36 zoom lens, f=3.4 - 122.4 mm (F1.6 - 4.5)
	Electronic zoom and gearing
	Zoom speed setting possible
Electronic zoom	: 16 power (combined with optic zoom gives 576 power max)
	Max zoom magnification setting possible
	Vertical resolution ON/OFF setting
Auto focus	: AUT/ONE-PUSH/MANUAL
	AF area setting possible (3 step)
Iris control	: AUTO/MANUAL
Synchronization method	: Internal synchronization/Line lock
	V phase adjustment possible
Lowest image illumination	: 1.0 lx (F1.6, AGC gain at maximum, COLOR mode)
	0.05 lx (F1.6, AGC gain at maximum, B/W mode)
	0.032 lx (F1.6, AGC gain at maximum, x32 SENSE UP, COLOR mode)
	0.002 lx (F1.6, AGC gain at maximum, x32 SENSE UP, B/W mode)
S/N	: Over 50 dB
Backlight compensation	: Center-weighted average metering/multi-spot evaluative metering
Day/Night (For VCC-800P only)	: AUTO / COLOR / B/W settings available
Electronic shutter	: • Fast shutter speed (SHORT) mode: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000,
	1/4000, 1/10000
	• Slow shutter speed (LONG) mode: x1, x2, x4, x8, x16, x32
Electronic sensitivity boosting	: AUTO/OFF, works with auto iris
	Up to x32 max setting possible
White balance	: ATW/AWC/MWB/3200/5600/FLUO (Fluorescent lighting)
AGC gain	: Low/Normal/Middle/High/Off (When “OFF” is selected, manual gain adjustment is
	available.)
Motion sensor	: ON/OFF, individual settings possible
Aperture	: H/V setting possible
Privacy masking	: ON/OFF, max of 24 masked locations (Wide view screen; 1 screen max 4 masks)
	The mask can be set regardless of the camera’s direction.
Alarm input/output	: External input: 8, External output: 2, NO (Normal open)/NC (Normal closed) switch
	Motion sensor with external alarm AND/OR output options
Camera titles	: ON/OFF, 16 characters
Camera view	: 8 settings
Auto mode	: Sequential pan/auto pan/tour (4 patterns each), Auto return
Rotation range	: Horizontal: 360° endless. Vertical: -5° - 185°
Rotation speed	: Horizontal- Preset: 435°/second. Manual: 0.1° - 120°/second
	Vertical- Preset: 400°/second. Manual: 0.1° - 120°/second
Preset positions	: 256 positions
Communications	: Coaxial control, RS-485
Operational temperature/humidity	: -10 – 50°C/below 90% RH
Power source	: DC 24 V

External appearance and specifications subject to change without notice.

57

Contents

About this manual VCC-MC800P VCC-MC700P Contents Main Features Expendable items Accessories Precautions Before Using the Menu Basic Operations for Performing Settings in the Menu About Setting Menus bSetting menu mode bSetting menu composition Camera Settings (CAMERA) GSetting the AGC level (AGC) ISetting the Day/Night function (DAY/NIGHT) HSetting the gamma correction level (GAMMA) A Adjusting synchronization signal (SYNC) B Setting lens aperture (IRIS) bAuto iris (AUTO) bManual iris (MANU) C Setting the white balance (WHITE BALANCE) bAuto trace white balance (ATW) bOne-pushautomatic white balance (AWC) bFixed white balance (3200/5600/FLUO) bManual white balance (MWB) D Setting the backlight compensation level (BLC) bMulti-spotevaluative metering (MULT) bCenter-weightedaverage metering (CENT) bMulti-spotmetering (MASK) E Setting the electronic shutter (SHUTTER) bFast shutter speed (SHORT) bSlow shutter speed (LONG) FSetting the profile compensation (APERTURE) G Setting the AGC level (AGC) HSetting the gamma correction level (GAMMA) I Setting the Day/Night function (DAY/NIGHT) bSetting the Day/Night function (AUTO) bUsing the color mode only (COLOR) bUsing the black and white mode only Lens Settings (LENS) A Setting the focusing mode (FOCUS) bAuto focus (AUTO) bManual focus (MANU) B Setting the zooming operations (ZOOM) Pan and Tilt Settings (PAN/TILT) A Registering a surveillance location (PRESET POSITION) bDetermining the surveillance position (POSITION) bSpecifying the camera ID and title bRegistering a view setting file (CAMERA VIEW) ASetting the motion sensor (MOTION) bGrouping the preset positions (SEQUENCE GROUP) bDeleting a preset position (DELETE) bSwitching to a preset position (PRESET GO) BMaking the amount of movement in the screen constant (PROPORTIONAL) Displaying a still image while switching C the surveillance location (FREEZE) DSetting the starting point (0 degrees) angle information (SET NORTH) E Limiting the tilting angle (TILT LIMIT) Auto Mode Settings (AUTO MODE) AMonitoring multiple preset positions sequentially (SEQUENCE) BPanning between two surveillance locations in loop (AUTO PAN) CRepeating a recorded monitoring process (TOUR) Returning automatically to the Dspecified surveillance mode (AUTO RETURN) Alarm Settings (ALARM) A Setting the alarm input (ALARM IN) B Setting the alarm output (ALARM OUT) CSetting the alarm disabling duration (ALARM DISABLE) D Setting the motion sensor (MOTION) bSetting the motion zone bSetting the detection sensitivity ESetting the alarm information display (ALARM DISPLAY) Privacy Mask Settings (PRIVACY MASK) Password Settings (PASSWORD) bEnabling password lock bDisabling password lock bChanging the password Language Settings (LANGUAGE) Miscellaneous Settings (OPTION) ASetting the display information (INFORMATION) bSetting the item to be displayed (DISPLAY) bDisplaying the system information (SYSTEM) BSetting the auto flip function (AUTO FLIP) CCorrecting the sway of the camera (STABILIZER) DSetting the auto pursuit function (AUTO PURSUIT) ESetting the mirroring function (MIRROR) F Performing(REFRESH)the refresh function Menu Structure Diagram Page Page Page Page Specifications SANYO Electric Co., Ltd