Auto Mode Settings (AUTO MODE)

BPanning between two surveillance locations in loop (AUTO PAN)

The Auto Pan mode allows you to pan between two surveillance locations in loop. In this mode, you set a start point, an end point, moving speed, panning direction and other options. You can create up to four Auto Pan groups.

AUTO MODE

 

 

SEQUENCE

A

y

AUTO PAN

1

y

TOUR

1

y

AUTO RETURN

SEQ A

 

TIME

1M

 

1Use the joystick lever (xy) to select [AUTO PAN], use the lever (vw) to select an Auto Pan group number (1 - 4), and press the [ENTER] button.

The AUTO PAN screen appears.

AUTO PAN 1

 

POSITION

 

STARTy

PAUSE TIME

3S

DIRECTION

 

 

LEFT

[PAN SPEED]

8

 

 

 

RUN

SET y

2Use the joystick lever (xy) to select [POSITION], use the lever (vw) to select “START y” (start point), and press the [ENTER] button.

The START SETTING screen appears.

START SETTING

SET y

3Use the joystick lever to determine a start point position of the Auto Pan mode operation, and press the [ENTER] button.

The AUTO PAN screen appears again.

4Use the lever (vw) to select “END y” (end point), and press the [ENTER] button.

The END SETTING screen appears.

END SETTING

SET y

5Use the joystick lever to determine an end point position of the Auto Pan mode operation, and press the [ENTER] button.

The AUTO PAN screen appears again.

Memo: When a start point and an end point are set to the same position, the camera rotates through 360 degrees repeatedly with the same tilting angle. The rotating direction is determined by the [DIRECTION] setting.

6Use the joystick lever (xy) to select [PAUSE TIME] and use the lever (vw) to select the duration for which the camera pauses at the start and end positions.

Available settings: 1S, 2S, 3S, 4S, 5S, 10S, 20S, 30S (S: Second, M: Minute)

7Use the joystick lever (xy) to select [DIRECTION] and use the lever (vw) to select the rotating direction during panning operation.

Available settings: RIGHT (rotates clockwise), LEFT (rotates counterclockwise)

8Use the joystick lever (xy) to select [PAN SPEED] and use the lever (vw) to select the speed in which the camera moves between the start and end points.

Available settings: 1 (slow) - 15 (fast)

9Use the joystick lever (xy) to select [RUN] – “SET y”, and press the [ENTER] button.

The on-screen menu disappears, and the Auto Pan mode operation starts.

Pressing the [ENTER] button stops the operation.

AUTO PAN 1

 

POSITION

STARTy

PAUSE TIME

3S

DIRECTION

 

 

LEFT

[PAN SPEED]

8

 

 

 

RUN

 

SET y

MENUBACK

Memo: While monitoring in the normal screen, the Auto mode is turned on or off in the main screen of the system controller. For details, refer to the system controller instruction manual.

While the camera operates in the Auto Pan mode, the auto focus function is disabled. In this case, the focusing mode is switched to the manual focus mode and the focus is fixed to the position set in the START SETTING screen.

However, when the panning speed is very slow or the camera pauses at the start/end point for five seconds or longer, the auto focus function is activated.

35