Pan and Tilt Settings (PAN/TILT)
2Use the joystick lever (xy) to select a preset number to assign to a group, and press the [ENTER] button.
The preset setting screen appears.
PRESET NO.001 |
| ||
POSITION | SET | y | |
TITLE |
| ON | y |
CAMERA | VIEW | 1 | y |
HOLD |
| OFF |
|
SEQUENCE |
|
| |
GROUP |
| A |
|
PAUSE | TIME | 5S |
|
PRESET | GO | SET | y |
MENU |
| BACK |
|
3Use the joystick lever (xy) to select [SEQUENCE GROUP] and use the lever (vw) to select a group to assign the preset number.
Available settings:
•*: Does not assign to a group. (Registers the preset number only.)
•A, B, C, D: Assigns a preset number to the group you selected. Assigned group is shown in the preset map screen.
4Use the joystick lever (xy) to select [PAUSE TIME] and use the lever (vw) to select the pause duration for sequential panning operation.
Available settings:
3S, 4S, 5S, 6S, 7S, 8S, 9S, 10S, 15S, 20S, 30S, 45S, 1M (S: Second, M: Minute)
☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.
bDeleting a preset position (DELETE)
The preset number “1” cannot be deleted.
1Use the joystick lever (xy) to select [PRESET POSITION] – “SET y”, and press the [ENTER] button.
The preset map screen appears.
2Use the joystick lever (xy) to select a preset number to delete, and press the [ENTER] button.
The preset setting screen appears.
PRESET NO.002 |
| ||
POSITION | SET | y | |
TITLE |
| ON | y |
CAMERA | VIEW | 1 | y |
HOLD |
| OFF |
|
SEQUENCE | A |
| |
GROUP |
|
| |
PAUSE | TIME | 5S |
|
DELETE |
| SET | y |
PRESET | GO | SET | y |
MENU |
| BACK |
|
3Use the joystick lever (xy) to select [DELETE] – “SET y”, and press the [ENTER] button.
“OK? y” appears under “SET y”.
PRESET NO.002 |
| ||
POSITION | SET | y | |
TITLE |
| ON | y |
CAMERA | VIEW | 1 | y |
HOLD |
| OFF |
|
SEQUENCE | A |
| |
GROUP |
|
| |
PAUSE | TIME | 5S |
|
DELETE |
| SET | y |
PRESET | GO | OK? | y |
SET | y | ||
MENU |
| BACK |
|
4Use the joystick lever (xy) to select “OK?”, and press the [ENTER] button.
The preset position you selected is deleted and the indication in the preset map screen changes to
PRESET NO.SELECT
1:A | 11:- 21:- 31:- |
2:- | 12:- 22:- 32:- |
3:- | 13:- 23:- 33:- |
4:- | 14:- 24:- 34:- |
5:- | 15:- 25:- 35:- |
6:- | 16:- 26:- 36:- |
7:- | 17:- 27:- 37:- |
8:- | 18:- 28:- 38:- |
9:- | 19:- 29:- 39:- |
10:- | 20:- 30:- 40:- |
MENU | BACK |
bSwitching to a preset position
(PRESET GO)
You can switch the surveillance location to a preset position by using the following procedure.
1Use the joystick lever (xy) to select [PRESET POSITION] – “SET y”, and press the [ENTER] button.
The preset map screen appears.
2Use the joystick lever (xy) to select a preset number, and press the [ENTER] button.
The preset setting screen appears.
When a preset position is registered, the surveillance location moves to the preset position.
3Use the joystick lever (xy) to select [PRESET GO] – “SET y”, and press the [ENTER] button.
The menu screen closes with the surveillance position being at the preset position.
30