
Miscellaneous Settings (OPTION)
DSetting the auto pursuit function
(AUTO PURSUIT)
When the motion sensor detects a movement of the target object, the orientation of the camera automatically changes pursuing the target object.
OPTION | SET | y |
INFORMATION | ||
AUTO FLIP | OFF |
|
STABILIZER | OFF |
|
AUTO PURSUIT | ON | y |
MIRROR | OFF |
|
REFRESH | SET | y |
This function cannot be configured when [MOTION] in the ALARM screen is set to "PRESET" or "ZONE".
Memo: You can also turn on or off the AUTO PURSUIT function by using the system controller. Press the [AUX ON] or [AUX OFF] button, and select "9" in the number entry screen.
1Use the joystick lever (xy) to select [AUTO PURSUIT] and use the lever (vw) to select “ON y”, and press the [ENTER] button.
The AUTO PURSUIT screen appears.
AUTO PURSUIT
[SENSITIVITY]
7
TESTOFF
If you do not enable the auto pursuit function, set [AUTO PURSUIT] in the OPTION screen to "OFF".
2Use the joystick lever (xy) to select [SENSITIVITY], and use the lever (vw) to set the sensitivity for movement detection.
The higher the setting value, the lower the sensitivity.
3If you want to test the sensitivity, use the joystick lever (xy) to select [TEST], and use the lever (vw) to select [ON].
When a movement is detected, a sensor pattern appears at the detected position. Adjust the setting value as necessary.
•The motion sensor detects the movement of the target object by perceiving the change of the brightness. The pursuit function may not work depending on the condition including the size or brightness of the target object.
•When there are multiple target objects that are moving, the camera pursues the target object whose change of the brightness is larger.
•The auto pursuit function is not activated while panning, tilting or zooming function is in operation, or AUTO MODE or PRESET GO mode is selected.
☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.
ESetting the mirroring function (MIRROR)
Reverses the displayed image electronically. This function can be used when the camera is installed upside down or when performing surveillance through a mirror.
OPTION | SET | y |
INFORMATION | ||
AUTO FLIP | ON |
|
STABILIZER | OFF |
|
AUTO PURSUIT | OFF |
|
MIRROR | OFF |
|
REFRESH | SET | y |
1Use the joystick lever (xy) to select [MIRROR] and use the lever (vw) to select a mirroring mode.
Available settings:
•OFF: Normal image
•HV: Rotated horizontally and vertically.
•H: Rotated horizontally.
•V: Rotated vertically.
OFF | HV | H | V |
Memo: The “HV” option can be used when the camera is installed on the floor. In this option, the direction to which the joystick lever is moved matches the direction to which the camera pans and tilts.
☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.
F Performing(REFRESH)the refresh function
Cleans the camera’s horizontal rotation contact area.
OPTION | SET | y |
INFORMATION | ||
AUTO FLIP | ON |
|
STABILIZER | OFF |
|
AUTO PURSUIT | OFF |
|
MIRROR | OFF |
|
REFRESH | SET | y |
1Use the joystick lever (xy) to select [REFRESH] – “SET y”, and press the [ENTER] button.
Cleaning starts, and after the cleaning completes the startup movements are performed.
Memo: The horizontal rotation contact area of the camera always moves. When the contact area becomes dirty, the camera’s operation can be unstable, burst can occur, or preset positions may deviate. It is recommended to clean the rotation contact area periodically by using the Refresh function.
☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.
51