Alarm Settings (ALARM)
CSetting the alarm disabling duration
(ALARM DISABLE)
The Alarm Disable function allows the alarm input to be ignored for the specified duration during manual pan/tilt/zoom operations and after manual operation.
| ALARM |
|
|
ALARM | IN | 1 | y |
ALARM | OUT | 1 | y |
ALARM | DISABLE | ON |
|
TIME |
| 2M |
|
MOTION |
| OFF |
|
ALARM | DISPLAY | OFF |
|
PRESET |
| OFF |
|
MENU |
| BACK |
|
Memo: You can also turn on or off the ALARM DISABLE function by using the system controller. Press the [AUX ON] or [AUX OFF] button, and select "8" in the number entry screen.
1Use the joystick lever (xy) to select [ALARM DISABLE], use the lever (vw) to select “ON/OFF”, and press the [ENTER] button.
Available settings:
•OFF: Disables the Alarm Disable function.
•ON: Enables the Alarm Disable function. ([TIME] appears under [ALARM DISABLE].)
2When “ON” is selected, use the joystick lever (xy) to select [TIME] and use the lever (vw) to select a duration for which the alarm input is ignored.
Available settings: 1M, 2M, 3M, 4M, 5M, 6M, 7M, 8M, 9M, 10M (M: Minute)
☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.
D Setting the motion sensor (MOTION)
The
ALARM |
|
|
ALARM IN | 1 | y |
ALARM OUT | 1 | y |
ALARM DISABLE | OFF |
|
|
|
|
MOTION | OFF |
|
ALARM DISPLAY | OFF |
|
PRESET | OFF |
|
MENU | BACK |
|
Use the joystick lever (xy) to select [MOTION] and use the lever (vw) to select the motion sensor used for alarm detection.
Available settings:
•OFF: Does not use the motion sensor.
•ZONE: Uses the sensor specified for the motion zone. (The MOTION ZONE screen appears.)
•PRESET: Uses the motion sensor selected in [MOTION] of the [CAMERA VIEW] settings.
Memo: For the “PRESET” option, the movement is detected only at the preset position: for the [ZONE] option, the movement is detected for the area specified from whole space where pan/tilt operations can be performed.
bSetting the motion zone
The Motion Zone function allows you to specify up to four surveillance areas (AREA 1 - 4) to detect movement.
Setting the surveillance area (AREA) and the detection option
To set the surveillance area and the detection option, perform the following procedure in the MOTION ZONE screen.
1Use the joystick lever (xy) to select [MOTION], use the lever (vw) to select “ZONE”, and press the [ENTER] button.
The MOTION ZONE screen appears.
MOTION ZONE |
|
AREA 1 | OFF |
AREA 2 | OFF |
AREA 3 | OFF |
AREA 4 | OFF |
SENSITIVITY | SET y |
ALARM OUT | OFF |
LINE OUT | OFF |
DURATION | 5S |
2Use the joystick lever (xy) to select [AREA (1 - 4)], use the lever (vw) to select “ON y”, and press the [ENTER] button.
The AREA setting menu appears.
| AREA 1 |
POSITION | SET y |
DISPLAY | OFF |
41