Privacy Mask Settings (PRIVACY MASK)
Depending on the target object, a certain part of the surveillance image may need to be protected for privacy. You can use the privacy mask (gray) to cover such part for privacy.
Up to 24 privacy masks can be set.
CAMERA | SET | y |
LENS | SET | y |
PAN/TILT | SET | y |
AUTO MODE | SET | y |
ALARM | SET | y |
PRIVACY MASK | SET | y |
PASSWORD | SET | y |
LANGUAGE | SET | y |
OPTION | SET | y |
1Use the joystick lever (xy) to select [PRIVACY MASK] – “SET y”, and press the [ENTER] button.
The MASK NO.SELECT screen appears.
MASK NO.SELECT
MASK 1 |
| OFF | |
MASK 2 |
| OFF | |
MASK 3 |
| OFF | |
MASK 4 |
| OFF | |
MASK 5 |
| OFF | |
MASK 6 |
| OFF | |
MASK 7 |
| OFF | |
MASK 8 | ªªª ººº | OFF | |
PRESET | OFF | ||
| |||
MENU |
| BACK |
2Use the joystick lever (xy) to select a privacy mask number (1 - 24), use the lever (vw) to select “SET y”, and press the [ENTER] button.
The POSITION screen appears and the mask pattern is displayed at the center of the screen.
MASK 1 SET
[POSITION]
3Use the joystick lever to move the surveillance image to determine the masking position, and press the [ENTER] button.
The SIZE screen appears.
MASK 1 SET
[SIZE]
Memo: While the lens reaches the tilt end (TILT LIMIT to "OFF"), pressing the [ENTER] button fixes the surveillance image. Use the joystick lever to move the mask pattern to determine the masking position, and press the [ENTER] button.
4Use the joystick lever (xy) to adjust the vertical size and use the lever (vw) to adjust the horizontal size, and press the [ENTER] button.
The TEST screen appears. You can confirm how the mask pattern is set by using the joystick lever to move the surveillance location.
MASK 1 SET
[TEST]
5Press the [ENTER] button.
This completes the privacy mask setting and the MASK NO.SELECT screen appears again. Make sure that the [MASK] setting is set to “ON”.
To continue setting other privacy masks, repeat steps 2 to 4.
☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.
Turning on or off the privacy mask
After the privacy mask is set, the mask can be turned on or off as necessary.
Use the joystick lever (xy) to select the mask number and use the lever (vw) to select “ON/OFF”.
| MASK NO.SELECT |
| ON | ||
MASK 1 | OFF |
|
| ||
|
| ||||
MASK 2 |
|
|
|
| |
OFF |
|
| |||
MASK | 3 | OFF |
|
| |
MASK | 4 | OFF |
|
| |
Turning the MASK NO.SELECT screen page
Up to 24 privacy masks can be set and the MASK NO.SELECT screen is divided into three pages. To turn the page, use the joystick lever to move the cursor to the page switching buttons, use the lever (vw) to select the advance or reverse button, and press the [ENTER] button.
ooo: To the previous page
ppp: To the next page
MASK 7 | OFF | Page | |
MASK 8 | OFF | ||
switching | |||
ªªª ººº |
| ||
PRESET | OFF | buttons | |
MENU | BACK | ||
|
The maximum number of privacy masks
You can set up to 24 privacy masks in total, and up to 4 privacy masks can be set per screen.
3 | 4 | 6 Screen 2 | |
Screen 1 |
|
| Screen 3 |
MASK 1 |
|
|
|
2 |
|
|
|
(Privacy mask) | 5 | 7 | 8 |
| |||
If you set more than four privacy masks per screen, “**>4!!” appears to the right of the screen title and the privacy mask with the largest setting number will be deleted.
44