SATO 5900RVe manual DSW2 Default Settings, DSW2 Configuration DSW1, DSW2 Function Descriptions

Unit 4: Operation

DSW2 DEFAULT SETTINGS

2-1	2-2	2-3		2-4	2-5	2-6	2-7	2-8
OFF	OFF	OFF		OFF	OFF	OFF	OFF	OFF
			DSW2 CONFIGURATION
DSW1	FUNCTION			SETTING		CONFIGURATION
2-1	Reserved			OFF
				ON
2-2	Media Sensor Selection			OFF	Gap Sensor
				ON	Eye-Mark Sensor
2-3	Head Check			OFF	Head Check Disabled
				ON	Head Check Enabled
2-4	Hex Dump			OFF	Hex Dump Disabled.
				ON	Hex Dump Enabled
2-5	Multi-Job Receive Buffer			OFF	Single Job Receive Buffer
				ON	Multi-Job Receive Buffer
2-6	Firmware Download			OFF	Disabled
				ON	Enabled
2-7	Protocol Code			OFF	Standard Protocol Mode
				ON	Non-Standard Protocol Mode
2-8	Operational Mode			OFF	Normal Operation
				ON	Emulation Mode for Original M5900
			DSW2 FUNCTION DESCRIPTIONS
FUNCTION					DESCRIPTION
Media Sensor Selection			Selects between a Gap or Eye-Mark detector.
Head Check			When enabled, will check for malfunctioning head elements.
Hex Dump			Allows hexadecimal printing of all data received to the print buffer.
Multi-Job Receive Buffer			Allows to continuously receive print jobs while compiling and printing
			other jobs.
Firmware Download			Places printer in mode for downloading software into flash ROM.
Protocol Code			Selects the command codes used for protocol control.
Operational Mode			Normal mode or for original M5900.

SATO M5900RVe Operator Manual PN 9001125A Page 4-4