SATO 5900RVe manual Service Mode

Unit 4: Operation

	CARD MODE
MENU	DESCRIPTION
CARD->MEMORYCOPY	Allows the copying of SATO Font in Flash ROM. LINE key
SATO FONT	moves the cursor and the FEED key selects the option.
CARD->MEMORYCOPY	Allows the copying of the entire card contents into Flash ROM.
ALL	LINE key moves the cursor and the FEED key selects the
	option.
MEMORY->CARDCOPY	Allows the copying of the entire contents of the Flash ROM or
ALL	firmware. A 4MB card or greater is required. An error occurs if
	an insufficient memory card is used.
CARD->MEMORYCOPY	Allows corying of Firmware program. Can overwrite the
PROGRAM	Firmware program card in program ROM. A program card is
	created by copying to the memory card of the Firmware
	mentioned later.
MEMORY->CARDCOPY	Allows copying of the Firmware program in the memory card. A
PROGRAM Y/N	2MB card or greater is required. LINE key moves the cursor and
	the FEED key selects the option.
CARD FORMAT	Allows formatting of the memory card and to clear all internal
	contents. LINE key moves the cursor and the FEED key selects
	the option.
MEMORY FORMAT	Allows formatting of Flash ROM memory. LINE key moves the
	cursor and the FEED key selects the option.
START	Initiates the copying or formatting activity. LINE key moves the
	cursor and the FEED key selects the option.
COPYING	Displays that the copying or formatting activity is underway.
COMPLETED	Displays that the copying or formatting activity is complete.
	After 3 seconds of display, returns to the original screen.
CARD COPY/FORMAT	Displays if the copying or formatting activity incuured an error
ERROR	and could not complete. The FEED key returns the display to
	the original screen.
CARD ID ERROR	Displays when the incorrect card has been selected. The FEED
	key returns the display to the original screen.

		SERVICE MODE
	MENU	DESCRIPTION
GAP	x.xV	Sets slice level. Sets the slice level at intervals of 0-3.2V. When
INPUT	x.xV	the value is set at 0, auto setting is done through the firmware
		software. LINE key moves the cursor and the FEED key selects
		the option.
AUTO ONLINE FEED		Sets the default feed. Sets whether to automatically feed paper
YES	NO	in ONLINE mode after startup. The defualt position is NO: do
		not feed paper. LINE key moves the cursor and the FEED key
		selects the option.

SATO M5900RVe Operator Manual PN 9001125A Page 4-20