Unit 4: Operation
CONFIGURATION MODES
This chapter provides an overview of the various configuration modes of the operation menu. With exception of the Power switch located on the back side of the printer, all of the following configuration activities are performed via the use of the operator panel located on the printer front.
Many settings may also be controlled via software commands. In the case of conflict between the software and control panel settings, the printer will always use the last entered valid setting.
NORMAL MODE
When a print job is received, the LCD will display the number of labels to be printed and will numerically descend as each label is printed.
| POWER = ON |
| ONLINE |
| QTY: 000000 |
LINE | Offline/User Mode |
| LINE |
OFFLINE |
|
000000 |
|
| OFFLINE |
| 000000 |
LINE | FEED |
| Feeds |
| blank label each |
| time is |
| pressed. |
| LINE |
| key changes |
| value. FEED key |
| moves from one |
| field to |
| another. |
YES/NO |
|
LINE & FEED
together
PRINT DARKNESS 1 2 3 4 5
PITCH OFFSET
+00mm
LINE
Cursor moves
each time LINE is
pressed.
FEED
PRINT SPEED 2 3 4 5 6
Cursor moves
each time LINE is
pressed.
FEED
FEED
Cursor moves each time LINE is pressed.
CANCEL PRINT JOB
YES NO
Figure 4-1, Normal Mode
SATO M5900RVe Operator Manual | PN 9001125A | Page |
