Unit 6: Maintenance
PRINT HEAD ALIGNMENT
Print head position has a direct impact on print quality. An improperly aligned print head will cause the print to be inconsistent across the label. The following procedure will provide guidance on print head alignment.
1Remove power and disconnect the power supply cord.
2Open the right housing cover to access and open the print assembly (1, Figure
3Detach lever guard (2), loosen two set screws (3), and one mounting screw (4).
4Manipulate print head assembly (5) so that it is parallel with platen roller (6).
5Secure mounting screw (4), two set screws (3), and attach lever guard (2).
6Close the right housing cover and restore power.
1 
| 5 |
2 | 4 |
| |
| 3 |
6
1
Figure 6-6, Print Head Alignment
SATO M5900RVe Operator Manual | PN 9001125A | Page |
