Savin 3310L, LF310 Solving Problems, This table lists some common problems and their solutions

StellaF1EN-3_FM.book Page 77 Monday, November 12, 2001 11:38 AM

Solving Problems

Solving Problems

This table lists some common problems and their solutions.

Problem	Required Action
Printed or sent image contains spots.	The Document Feeder (ADF) or scanner is dirty. Clean
	them.
	Make sure that ink or correction fluid is dry before set-
	ting the original.

	Reference
	See p.112 “Cleaning the Scanner”, <Advanced Fea-
	tures> .
Received image is too light.	Request the sender to increase the image density.
	When using moist, rough or processed paper, the
	printed image may be hard to see. Only use recom-
	mended paper.

Reference

See p.127 “Originals”, <Advanced Features> .

When D appears on the display, toner is beginning to run out. Replace the toner cassette soon.

		Reference
		See p.117 “Replacing the Toner Cassette”, <Ad-
		vanced Features> .
Message appears blank at the other	The original was set upside down. Set it properly.
end.		Reference
		See p.23 “Setting Originals”.
You want to cancel a Memory Trans- If the original is being stored, press the {Clear/Stop}key.
mission.		Reference
		See p.27 “Canceling a Memory Transmission”.
	If the original is being sent, use "Cancel TX/RX" in the
	Job Information menu.
		Reference
		See p.13 “Canceling Transmission or Reception”,
		<Advanced Features> .
You want to cancel an Immediate	Press the {Clear/Stop} key.
Transmission.		Reference
		See p.31 “Canceling an Immediate Transmission”.
You cannot add any destinations to a 69 destinations have been programmed with the num-
Group, even though the maximum	ber keys. Program more numbers with Quick Dials or
number of destinations has not been	Speed Dials.
reached.		Reference
		See p.57 “Groups”

4

77