Savin 3310L, LF310, F9103, 3725 manual Shown and you cannot delete Destination for this key

StellaF1EN-3_FM.book Page 49 Monday, November 12, 2001 11:38 AM

Quick Dial

J Press the {Clear/Stop} key, and then reenter the destination name.

Note

❒Under rare circumstances, gar- bled characters may appear

during name registration if you use the {Pause/Redial} key to display the fax number of par- ties located in other countries. If this happens, simply delete the

garbled characters using 0 or 1 and the {Clear/Stop} keys, and then go on to enter the name.

K Press the {OK} key.

The name is programmed.

L Press 0 or 1 to select "On" or "Off".

Note

❒Label insertion allows the re- ceiver's name that is pro - grammed in Quick Dial or Speed Dial to be printed on the fax when it is received at the other end. See p.8 “Label Inser- tion”, <Advanced Features> .

M Press the {OK} key.

Deleting

The following procedure describes how to delete fax numbers registered in Quick Dial keys.

Limitation

❒When a Quick Dial key is being

used for a standby Memory Trans- mission, the message " This Dial

is in Use. Cannot Delete. " is	3
shown and you cannot delete the
destination for this key.

A Press the {User Tools} key.

B Press 0 or 1 until " 2. Fax Fea- tures " is displayed.

C Press the {OK} key.

If you want to store another Quick Dial, go to step E.

N Press the {User Tools} key to re- turn to standby display.

Confirm that " 1. Program / Delete " is displayed.

D Press the {OK} key.

49