StellaF1EN-3_FM.book Page 41 Monday, November 12, 2001 11:38 AM

3. Registering

Own Name/Fax Header/Own Fax Number

Make sure that all necessary settings are made before connecting your ma- chine to the telephone line.

Own Name

This should be your name or com- pany name, in 20 characters or less. During communication, if the oth- er party's fax machine supports Own Name, this replaces the Own Fax Number that follows. This name will appear on the display of the other party's fax machine, and the name registered on that ma- chine will appear on yours.

Limitation

The registered name will not be used unless the other party has the same machine of the same make that supports the Own Name function.

Fax Header

This is ordinarily your name or company name. Your fax header can be up to 32 characters long, and is printed on the header of ev- ery page you send.

Own Fax Number (Required by inter- national law)

This is your fax machine's phone number that must include country and area codes using 20 characters or less. During any communica- tion, your Own Fax Number ap- pears on their display. (Conversely their Own Fax Number appears on your display.)

Note

In some areas, the Own Fax Number is preprogrammed by your service representative, and cannot be re-programmed by the user.

Important

When sending a fax, your Own Fax Number is required by interna- tional law. You cannot legally con- nect a fax machine to the telephone system if the Own Fax Number is not programmed.

Note

You can confirm the Own Name, Fax Header, and Own Fax Number settings in the User Parameters List. See p.90 “Printing the User Parameter List”, <Advanced Fea- tures> .

41

Page 47
Image 47
Savin 3310L, LF310, F9103, 3725 manual Own Name/Fax Header/Own Fax Number, Own Fax Number Required by inter- national law