Savin LF310, F9103, 3725, 3310L manual Quick Dial, Press the User Tools key

StellaF1EN-3_FM.book Page 46 Monday, November 12, 2001 11:38 AM

Registering

Quick Dial

To save time, you can program a fax number that you use often into a Quick Dial key. Then, whenever you are sending a message to that loca- tion, just press that Quick Dial key to dial.

Note

❒You can confirm fax numbers stored in Quick Dials on the Quick Dial List. See p.56 “Printing Re- ports/Lists”, <Advanced Features> .

A Press the {User Tools} key.

3

46

Registering

The following procedure describes how to register fax numbers in Quick Dial keys. There are 30 Quick Dials available.

You can register the following items in each key:

•Destination fax number (up to 254 digits)

•Destination name (up to 20 charac- ters)

•Label Insertion (whether to print the destination name on faxes sent to this number)

Important

❒We recommend that you print the Quick Dial list and keep it when you program or change fax num- bers . See p . 56 “ Printing Re - ports/Lists”, <Advanced Features> .

Limitation

❒When a registered Quick Dial key is being used for a standby Memo- ry Transmission, the message "

This Dial is in Use. Cannot

Change. " is shown and you can- not change the destination for this key.

B Press 0 or 1 until " 2. Fax Fea- tures " is displayed.

C Press the {OK} key.

Confirm that " 1. Program / Delete " is displayed.

D Press the {OK} key.

Confirm that " 1. Prog. Quick Dial " is displayed.