69
4. Troubleshooting

Loading Paper in the Main Paper Tray

If there is no paper in the main paper
tray, the B indicator on the control
panel lights.
Use the following procedure to load
the paper.
Important
❒When loading paper, be careful
not to pinch your fingers inside the
machine.
❒Before loading paper, make sure
that the machine is not outputting
a copy or received document.
Note
❒Regarding paper types and sizes
that can be used, see p.128 “Pa-
per”, <Advanced Features> .
❒If you want to change the paper
size, see p.62 “Changing the Paper
Size Setting”, <Advanced Features>
.
A
AA
AMake sure that the main paper
tray is not being used.
B
BB
BPull out the main paper tray until
it stops.
C
CC
CPush the metal plate down, and
then square the paper and load it
in the tray.
Important
❒Do not stack paper over the lim-
it mark.
❒If paper is left in the main paper
tray and you add paper, a mis-
feed might occur.
Note
❒Shuffle the paper before setting
it in the tray.
D
DD
DPush the main paper tray in until
it stops.
StellaF1EN-3_FM.book Page 69 Monday, November 12, 2001 11:38 AM