Sceptre Technologies x32 user manual Ready to Watch Some TV?, Starting up the X32 LCD HDTV

SCEPTRE X32 HDTV User Manual

Ready to Watch Some TV?

Starting up the X32 LCD HDTV

1.Make sure your power cable is connected and the standby red light in the front of the TV is lit up.

2.Check all your connection cables off the side or the back of your TV and also your AV devices. Make sure they are all connected securely.

3.Turn on your TV and other AV devices if necessary.

4.Select the correct source according to the Connecting pages.

If You’ve Connected Antenna or Cable to the TV…

If an antenna or cable is connected to your TV’s ATSC/NTSC port, you will need to use the source button on the remote control or the source button on the right side of the TV to switch to TV (Cable / Air) and auto-scan for channels.

1.Open up the OSD by pressing the MENU button on the remote control.

2.Make sure CHANNEL main option is highlighted in yellow; if not please use the ▲ or ▼ buttons to select CHANNEL then press the ► direction button to switch to TUNER MODE function.

- 38 -

www.SCEPTRE.com