Sceptre Technologies x32 user manual SCEPTRE X32 HDTV User Manual

SCEPTRE X32 HDTV User Manual

•Please reference the set-top box’s manual as well, to make sure the set-top box is configured to output correctly to the TV.

•Sceptre’s X32 LCD HDTV supports SONY’s universal remote code. Please look up SONY’s codes in your universal remote’s hand book.

If You Want the Good Connection with S-Video…

1.Make sure the power of X32 LCD HDTV and your set-top box is turned off.

2.Obtain an S-Video Cable. Connect the S-Video connector to both your set-top box and Composite 1’s S-Video connector port off the back of your X32 LCD HDTV.

3.Obtain a RCA Audio Cable. Connect the white color connector to both your set-top box and Composite 1’s white connector port off the back of your X32 LCD HDTV.

4.Connect the red color connector to both your set-top box and Composite 1’s red connector port off the back of your X32 LCD HDTV.

5.Turn on the X32 LCD HDTV and your set-top box.

6.Use the remote control’s source button or the source button on the right side of the TV to switch to AV1 (S-Video).

- 32 -

www.SCEPTRE.com