Schneider Electric 890USE19600 Version 1.0 STB NIB 1010 Fieldbus Interface, Summary, Connections

Models: 890USE19600 Version 1.0 INTERBUS Basic Network Interface Module

1 71
Download 71 pages 16.46 Kb
Page 20
Image 20
STB NIB 1010 Fieldbus Interface

The STB NIB 1010 Basic NIM Module

STB NIB 1010 Fieldbus Interface

Summary

The fieldbus interface on the STB NIB 1010 is the point of connection between an

 

Advantys STB island bus and the INTERBUS network. Like every INTERBUS node,

 

the NIM has two nine-pin SUB-D connectors for data reception (in) and transmission

 

(out). The connectors are located on the face of the NIM.

Fieldbus Port

 

The in and out fieldbus interfaces are located on the front of the INTERBUS NIM at

Connections

the top:

It is recommended that you use 9-pin SUB-D connectors compliant with INTERBUS Club or corresponding international standard.

The in connector is optically isolated. The signal level is according to EIA RS-485.

20

890USE19600 April 2004

Page 20
Image 20
Schneider Electric 890USE19600 Version 1.0 manual STB NIB 1010 Fieldbus Interface, Summary, Fieldbus Port, Connections