Schneider Electric INTERBUS Basic Network Interface Module, 890USE19600 Version 1.0 Use either

Models: 890USE19600 Version 1.0 INTERBUS Basic Network Interface Module

1 71
Download 71 pages 16.46 Kb
Page 25
Image 25
Use either:

The STB NIB 1010 Basic NIM Module

Connectors

Use either:

 

￿a screw type power connector, available in a kit of 10 (model STB XTS 1120)

 

a spring clamp power connector, available in a kit of 10 (model STB XTS 2120)

 

The following illustrations show two views of each power connector type. A front and

 

back view of the STB XTS 1120 screw type connector is shown on the left, and a

 

front and back view of the STB XTS 2120 spring clamp connector is shown on the

 

right:

1STBXTS 1120 screw-type power connector

2STBXTS 2120 spring clamp power connector

3wire entry slot

4screw clamp access

5spring clamp actuation button

Each entry slot accepts a wire in the range 0.14 to1.5 mm2 (28 to 16 AWG). Each connector has a 3.8 mm (0.15 in) pitch between the receptacles.

We recommend that you strip at least 9 mm from the wire’s jacket to make the connection.

890USE19600 April 2004

25

Page 25
Image 25
Schneider Electric INTERBUS Basic Network Interface Module, 890USE19600 Version 1.0 manual Use either