TSXCUSBMBP Settings for Concept & ProWORX32
B
TSXCUSBMBP Settings for Concept & ProWORX32
Introduction | This section describes how to configure Concept & ProWORX32 to work the |
| TSXCUSBMBP. |
Setting the |
|
When using serial Modbus communications with Concept, a delay of approximately | |
Optimum Baud | 50 milliseconds occurs before each Modbus request is transmitted. |
Rate in Concept | When using Concept with the TSXCUSBMBP, a serial interface must be selected. |
| |
| Therefore, the overall throughput of the TSXCUSBMBP with Concept is only slightly |
| above that of a serial Modbus interface. Setting the baud rate in Concept to 19200 |
| instead of the 9600 default will slightly improve performance. |
Setting the |
|
When using serial Modbus communications with ProWORX32, there are no delays | |
Optimum Baud | inserted and the TSXCUSBMBP runs at the expected USB speed. |
Rate in |
|
ProWORX32 |
|
|
|
35011984 02/2006 | 61 |
