Schneider Electric TSXCUSBMBP Entering Routing Paths into the Routing Table, Step Action

Configuring the TSXCUSBMBP Driver

Entering Routing Paths into the Routing Table

Use the following procedure to change an entry in the Routing Table:

Step Action

1Select Routing from the top level menu on the TSXCUSBMBP Driver Interface window.

2Select the entry to be changed in the table by left clicking on it (the entry will become highlighted)

3Enter the Modbus ID and the associated Modbus Plus Routing Path in the fields below the table.

4Click on the Update button to update that entry in the table. You will see the entry in the table above change to the new values.

5Repeat steps 2-4 for each entry to change in the Routing table.

Note: Clicking on the Close button will save all Routing Table entries and return to the top level menu. The new Routing Table will take effect immediately.

35011984 02/2006 31