Schneider Electric TSXCUSBMBP - page 59

TSXCUSBMBP Settings for Unity
35011984 02/2006 59
3 Install and make sure the ModbusDriver is running for Unity's Modbus
Communication. (This is used by Unity, OFS, etc.)
4 Configure the ModbusDriver to use the USB MBP Virtual port (COM3).
5 Setup Unity's PLC Address setting for Modbus01 (ModbusD river), and the local
ModbusPlus address or the address as defined in the USB MBP routing table.
6 Make sure both drivers are running:
Step Action