Configuring the TSXCUSBMBP Driver
Configuring the Virtual Serial (COM) Port
Introduction | The Virtual Serial Port used by the application to send Modbus requests to the | |
| TSXCUSBMBP Driver will default to COM3 during installation. | |
COM3 |
|
|
If another device is already installed on COM3, the Virtual Serial Port will need to | ||
Assignment | be changed.: |
|
|
|
|
| If... | Then... |
|
|
|
| another device is already installed on COM3 | the Virtual Serial Port will need to be changed |
|
|
|
|
|
|
Port Changing To change the port reference for the Virtual Serial Port in the application:
1If an application is open that is using the Virtual Serial Port to communicate with the TSXCUSBMBP, it should be closed.
2Select Virtual Modbus Port from the top level menu on the TSXCUSBMBP Driver Interface Window.
3Select the desired COM port from the list of available COM ports.
4Click on the Save button to save the new setting.
Note: The new setting will take effect immediately upon pressing the Save button. The application being used with the TSXCUSBMBP must be configured to communicate using the serial port configured here.
26 | 35011984 02/2006 |
