C0522 through C1030
Remote Condenser Models - User Manual
13.Remove water distributors from ice machine. Inspect distributor for restricted orifice holes. Be sure all holes are full open.
Squeeze Tabs Together, Slide Out Until it Stops, Then Lift to Remove
Remove Water Distributor
18.Wash all interior surfaces of the freezing compartment, including evaporator cover and right side panel liner with the sanitizer solution.
19.Return water level sensor, ice thickness sensor, water distributors and curtains to their normal positions.
20.Push and hold the clean button to drain the reservoir. Push and release the clean button again and when the purge valve indicator light goes out, immediately pour the remaining cleaning solution into the reservoir.
21.Circulate the sanitizer solution for 10 minutes, then push and release the Clean button.
22.Allow the water system to be flushed of sanitizer for at least 20 minutes, then push and release the Off button.
23.Return the evaporator cover and front panel to their normal position and secure with the original fasteners.
24.Push and release the On button to resume ice making.
Inspect Orifice Holes
Inspect Water Distributor
14.Locate ice thickness sensor. Squeeze mounting legs together to release sensor. Wash the metal surfaces of the sensor and the adjustment screw with ice machine scale remover solution. Also wash the water distributor and curtain with the ice machine scale remover solution.
15.Locate water level sensor. Squeeze catches together and pull up to remove sensor. Wash metal surfaces of sensor with ice machine scale remover solution.
16.Mix a solution of sanitizer.
Note: A possible sanitizing solution may be made by mixing 1 ounce of liquid household bleach with 2 gallons of warm
17.Thoroughly wash all surfaces of the ice thickness sensor, water level sensor, curtain and water distributor with the sanitizer solution.
Ice Storage Bin
1.Remove and discard all ice.
2.Mix a solution of 7 ounces Scotsman Clear 1 ice machine scale remover to 84 ounces of potable water and wash all interior surfaces of the ice storage bin to remove any mineral scale build up. Pour excess cleaner solution into the bin’s drain.
3.Mix a solution of sanitizer and thoroughly wash all interior surfaces of the ice storage bin. Pour excess sanitizer solution into the bin’s drain.
July 2006
Page 22
