C0522 through C1030
Remote Condenser Models - User Manual
Model Number Description
Example | Hotel Dispensers |
•
•C=cuber
•06=nominal capacity in 100s of pounds
•30=nominal width of cabinet in inches
•S=cube size, S=small or half dice, M=medium or full dice
•R=condenser type. R=Remote
•
•A=series revision code. A=first series.
Note: In some areas of this manual model numbers may include only the first five characters of the model number, meaning that cube size, condenser type and voltage differences are not critical to the information listed there.
Options:
There are several options available for field installation. They include:
•KVS -
•KSB - SmartBoard Advanced feature board
Some installations require bin or dispenser adapters. See the table below.
Standard bin applications – Adapter information
|
| B530P, |
|
| |
| BH360, | B330P, | BH800, |
| |
| B530S, | BH900, | |||
Model | or B222 | BH801, | |||
HTB555 | B948S | ||||
| or B322 | B842S | |||
| or |
| |||
|
|
|
| ||
|
| BH550 |
|
| |
C0522 | Direct fit | KBT27 | Not | Not | |
available | available | ||||
|
|
| |||
C0530, |
|
|
|
| |
C0630, | Does | Direct fit | KBT28 | KBT22 | |
C0830, | not fit | ||||
|
|
| |||
C1030 |
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
Although an unlikely use for a remote cuber, the HD22 and HD30 can be used without an adapter:
HD22 – use with C0522R
HD30 – use with C0530R
Ice and Beverage Dispensers - Adapter Information
Model | ID150 | ID200 or ID250 | |
C0522 | KBT42 | KBT43 | |
C0530, C0630, | Does not | KBT44 | |
C0830, C1030 | fit | ||
|
Other bins and applications:
Note the drop zone and optional ultrasonic sensor locations in the illustrations.
Scotsman ice systems are designed and manufactured with the highest regard for safety and performance. They meet or exceed the standards of UL and NSF.
Scotsman assumes no liability of responsibility of any kind for products manufactured by Scotsman that have been altered in any way, including the use of any part and/or other components not specifically approved by Scotsman.
Scotsman reserves the right to make design changes and/or improvements at any time. Specifications and design are subject to change without notice.
August 2006
Page 3