C0522 through C1030
Remote Condenser Models - User Manual
Control Switches
There is front access to two switches – On and Off. Optional adjustable ice level control (KVS)
Status |
| Off |
|
|
|
Power WaterOn
To switch the machine OFF, push and release the Off button. The machine will shut off at the end of the next cycle.
To switch the machine ON, push and release the On button. The machine will go through a start up process and then resume ice making.
Control Options
There are three optional, field installed controls that can be on this machine.
•VariSmart™ adjustable ice level control
•SmartBoard™ advanced control board and data logger
When this option is present there is an adjustment post and an additional indicator light to the right of the four indicator lights mentioned above. The ultrasonic ice level control allows the user to control the point that the ice machine will stop making ice before the bin or dispenser is full. Reasons for this include:
•Seasonal changes in ice used
•Planning to sanitize the bin
•Faster turnover for fresher ice
•Certain dispenser applications where maximum ice level is not desired
Use of adjustable ice level control
o | w | Bin |
er | ||
L |
|
|
|
| Full |
Adjust Ice Level
VariSmart Control Area
There are several positions the ice level can be set to, including Off (knob and label indicators lined up), where it fills the bin until the standard bin control shuts the machine off. See the kit’s instructions for complete details.
Rotate the adjustment post to the desired ice level. The machine will fill up to that level and when it shuts off the indicator light next to the adjustment post will be On.
Note: Ice will build up in the bin or dispenser at an angle, the distances listed above will be from the sensor to the top of the ice directly beneath it.
The actual distance between the highest point of the ice may be closer or further away, depending upon the angle of the ice.
July 2006
Page 19