SCCG50 & SCCP50 Service Manual
Cube Size Adjustment
The cube size can be adjusted by changing the amount of freeze cycle time. This is done by a button press sequence.
Note: There is only one correct cube size. See the illustrations.
To adjust cube size:
1.Shut the machine off: If it's off on bin full press and release the On/Off button once, switching the Ice Making light off. If the machine is making ice hold the On/Off button in until the Ice Making light is off.
2.Press and hold the Clean button for 5 seconds (light on), then release (light out)
Side Views of Cubes
Too Small, Adjust Cycle Longer
3. View the lights. Compare to the table below.
Cube Size Change Table
| On/Off | Water | Clean |
Default | off | off | off |
Add 1 minute | on | off | off |
Add 2 minutes | off | on | off |
Add 3 minutes | off | off | on |
Add 4 minutes | on | on | on |
- 1 minute | flash | off | off |
- 2 minutes | off | flash | off |
- 3 minutes | off | off | flash |
- 4 minutes | flash | flash | flash |
4.Select the amount of change.
5.Push and release the On/Off button until the correct light pattern is displayed.
6.Push and release the Clean button to select that setting.
Just Right
Too Large, Adjust Cycle Shorter
7. Push and release On/Off to return to ice making.
June 2008
Page 13
