©Copyright
SDIO Simplified Specification Version 2.00
Supported | Abbreviation | SDMEM | SDIO | |
Commands | System | System | ||
| ||||
CMD0 | GO_IDLE_STATE | Mandatory | Mandatory | |
CMD1 | SEND_OP_COND | Mandatory |
| |
CMD5 | IO_SEND_OP_COND |
| Mandatory | |
CMD6 | SWITCH_FUNC | Mandatory1 | Mandatory1 | |
CMD9 | SEND_CSD | Mandatory |
| |
CMD10 | SEND_CID | Mandatory |
| |
CMD12 | STOP_TRANSMISSION | Mandatory |
| |
CMD13 | SEND_STATUS | Mandatory |
| |
CMD16 | SET_BLOCKLEN | Mandatory |
| |
CMD17 | READ_SINGLE_BLOCK | Mandatory |
| |
CMD18 | READ_MULTIPLE_BLOCK | Mandatory |
| |
CMD24 | WRITE_BLOCK | Mandatory |
| |
CMD25 | WRITE_MULTIPLE_BLOCK | Mandatory |
| |
CMD27 | PROGRAM_CSD | Mandatory |
| |
CMD28 | SET_WRITE_PROT | Optional |
| |
CMD29 | CLR_WRITE_PROT | Optional |
| |
CMD30 | SEND_WRITE_PROT | Optional |
| |
CMD32 | ERASE_WR_BLK_START | Mandatory |
| |
CMD33 | ERASE_WR_BLK_END | Mandatory |
| |
CMD38 | ERASE | Mandatory |
| |
CMD42 | LOCK_UNLOCK | Optional |
| |
CMD52 | IO_RW_DIRECT |
| Mandatory | |
CMD53 | IO_RW_EXTENDED |
| Mandatory | |
CMD55 | APP_CMD | Mandatory |
| |
CMD56 | GEN_CMD | Mandatory |
| |
CMD58 | READ_OCR | Mandatory |
| |
CMD59 | CRC_ON_OFF | Mandatory | Mandatory | |
ACMD13 | SD_STATUS | Mandatory |
| |
ACMD22 | SEND_NUM_WR_BLOCKS | Mandatory |
| |
ACMD23 | SET_WR_BLK_ERASE_COUNT | Mandatory |
| |
ACMD41 | SD_APP_OP_COND | Mandatory |
| |
ACMD42 | SET_CLR_CARD_DETECT | Mandatory |
| |
ACMD51 | SEND_SCR | Mandatory |
|
Comments
Used to change from SD to SPI mode
Added in Part 1 v1.10
CSD not supported by SDIO
CID not supported by SDIO
Card Status includes only SDMEM information.
.
CSD not supported by SDIO.
Block mode is optional
SCR includes only
Table A-15 SPI Mode Command List
1For Part 1 v1.10 or higher Memory or Combo Cards
60