assembly
3. For plain-end blades, remove blade holders (with
blade installed) from retainer clips by putling
clips away from blade holders. Pull out upper and
Iowe_ blade holders Ptace blade ho(der' assembly
in blade holder pockets with set screw side
upward
4 Use set screw wrench to remove set screws in
blade holders, and remove blade
BLADE HOLDERS ///J " _'
HOL' .% ETS,,I,,--./5. For pin type blades, place blade holder keys as
shown on blade holders before releasing tension
6 After blade tension is released, pull blade out of
upper and lower blade holders, remove blade
holder keys and blade holders
BLADE
HOLDER
PIN-BLADE
SLOT
UPPER ARM
SLOT I_!J _
BLADE HOLDER /
BLADE HOLDER
12