assembly
INSTALLATION OF BEVEL SCALES
1 With blade installed and tensioned, Iocatetwo (2)
bevel scales among loose parts
2 Locate slit in paper backing on back side of scale.
Remove backing on the zero end of scale.
3 While holding scale by the end still protected by
the backing, lightly position unprotected end in
the scale recess and slide it under the indicator
Align the zero mark with the indicator and press
the scale to the base.
PEEL OFF THIS PIECE OF SCALE BACKING FIRST
(2ND SCALE POSIT!ON}
RECESS
IN BASE LINE UP "0" MARK WITH INDICATOR
=[lllUil,llllll=U=1=k JJ
4. Loosen bevel lock knob located under- the base
and tilt head away from scale
5 Fold scale back and remove remaining paper
backing. Press entire scale against base Smooth
out any wrinkles or air bubbles.
6 Repeat on opposit# side
TILT HEAD TO CLEAR SCALE
BEVEL LOCK KNOB
14