UPPER THRUST BEARING | 1/8" SETSCREW |
WRENCH
4.Loosen the two setscrews which lock the upper blade guides and separate them about 1/8".
Do that same thing to the lower guides beneath the table. See Step 6 for location of setscrew.
_ SETSCREWS
THRUSTBEARIN!i tl / UPPER THRUST BEARING
ADJ. KNOB
J t :_ /1[8" SETSCREW WRENCH
5. Loosen the setscrew which locks the upper thrust bearing and turn the knob until the thrust bearing is all the way back as shown.
_UIDE
6.Loosen the setscrew which locks the lower thrust bear- ing and turn the knob until the thrust bearing is aft the way back.
LOWER THRUST BEARING
t CREW
LOWER
BLADE GUIDE-._ f
/
SETSCREW
13
